Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Temperature Range [Min] | 68 °F |
| Port Restrictor Plugs | None |
| Function | 3-Position Spring Centered |
| Pilot Valve Type | N/A |
| Temperature Range [Max] | 122 °F |
| Design No. | 60 |
| Compatible Fluids | Petroleum Oil |
| Coil Type | Flying Leads |
| Tank Port Rating | 1000 |
| AC/DC | AC |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Coil Rating Code | D |
| Seal Material | Buna-N |
| Spool Code | 0 |
| Port T Pressure Rating | 1000 psi |
| Operation | Solenoid Operated |
| Cycle Rate [Max] | N/A |
| Solenoid | Double |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Actuation Identification | Solenoid A, Solenoid B |
| Surge Suppressor/Damper | None |
| No. of Stages | Single Stage |
| Pressure [Max] | 4500 psi |
| Reducer Module | N/A |
| Body Material | Gray Iron |
| Crossover | All Ports Open |
| Pressure Port Check Valve Pressure | N/A |
| Rated Flow [Max] | 24 gal/min |
| Pilot/Drain | None |
| NFPA Size | D05 |
| Model No. | DG4S4-010C-D-60 |
| Indicator Lights | No |
| Performance | Standard Performance |
| Leakage | Standard Performance |
| Mechanical Options | None |
| Actuator Type | Solenoid |
| Center Position | All Ports Open |
| Mounting | Subplate/Manifold Mount |
| Manual Override | Plain Override |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Fluid Cleanliness | 19/17/14 micron |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Response Type | Standard Response |
| Response Time | 20 to 40 ms |
| Electrical Options Code | None |
| Coil Type Code | None |
| Electrical Options | None |
| Spool Spring Arrangement Code | C |
| Weight | 10.0 LB |
