- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Reducer Module | N/A |
| Pilot Valve Type | N/A |
| Response Type | Standard Response |
| Pressure Port Check Valve Pressure | N/A |
| Tank Port Rating | 1000 |
| Model No. | DG4S4-010C-D-60 |
| Coil Type | Flying Leads |
| Seal Material | Buna-N |
| Crossover | All Ports Open |
| AC/DC | AC |
| Coil Type Code | None |
| Spool Code | 0 |
| Performance | Standard Performance |
| Pressure [Max] | 4500 psi |
| NFPA Size | D05 |
| Fluid Cleanliness | 19/17/14 micron |
| Electrical Options | None |
| Solenoid | Double |
| Center Position | All Ports Open |
| Compatible Fluids | Petroleum Oil |
| Function | 3-Position Spring Centered |
| Port Restrictor Plugs | None |
| Valve Type | Standard-Duty |
| Surge Suppressor/Damper | None |
| Rated Flow [Max] | 24 gal/min |
| Electrical Options Code | None |
| Manual Override | Plain Override |
| Mounting | Subplate/Manifold Mount |
| Flow Direction Code | 4 |
| Design No. | 60 |
| Temperature Range [Min] | 68 °F |
| Cycle Rate [Max] | N/A |
| Port T Pressure Rating | 1000 psi |
| Coil Rating Code | D |
| Leakage | Standard Performance |
| Mechanical Options | None |
| Spool Spring Arrangement Code | C |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Overrides | No Overrides |
| Actuation Identification | Solenoid A, Solenoid B |
| Response Time | 20 to 40 ms |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Indicator Lights | No |
| Temperature Range [Max] | 122 °F |
| Operation | Solenoid Operated |
| Pilot/Drain | None |
| No. of Stages | Single Stage |
| Mechanical Options Code | None |
| Body Material | Gray Iron |
| Actuator Type | Solenoid |
| Weight | 10.0 LB |

