Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Manual Override | Plain Override |
| Performance | Standard Performance |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Temperature Range [Min] | 68 °F |
| Pilot Valve Type | N/A |
| Mounting | Subplate/Manifold Mount |
| Electrical Options Code | None |
| Port Restrictor Plugs | None |
| Indicator Lights | No |
| Temperature Range [Max] | 122 °F |
| Pressure [Max] | 4500 psi |
| Design No. | 60 |
| Actuation Identification | Solenoid B |
| Actuator Type | Solenoid |
| Watt Rating | 30 W |
| Solenoid | Single |
| Crossover | All Ports Blocked |
| NFPA Size | D05 |
| Mechanical Options | None |
| Leakage | Standard Performance |
| Flow Direction Code | 4 |
| Cycle Rate [Max] | N/A |
| Rated Flow [Max] | 24 gal/min |
| Model No. | DG4S4-012B-H-60 |
| Response Time | 50 to 80 ms |
| Electrical Connection | KU W/ Deutsch Connector |
| Seal Material | Buna-N |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Mechanical Options Code | None |
| Coil Type Code | None |
| Surge Suppressor/Damper | None |
| Response Type | Standard Response |
| Tank Port Rating | 1000 |
| AC/DC | DC |
| Spool Code | 2 |
| Reducer Module | N/A |
| Body Material | Gray Iron |
| Spool Spring Arrangement Code | B |
| Pilot/Drain | None |
| Pressure Port Check Valve Pressure | N/A |
| Function | 2-Position Spring Centered, End to Center, Single End |
| Voltage & Frequency | 24 VDC |
| Compatible Fluids | Petroleum Oil |
| Fluid Cleanliness | 19/17/14 micron |
| Center Position | All Ports Blocked |
| Coil Rating Code | H |
| Electrical Options | None |
| Coil Type | Flying Leads |
| No. of Stages | Single Stage |
| Weight | 10.0 LB |
