Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Mechanical Options Code | None |
| Solenoid | Single |
| Manual Override | Plain Override |
| Spool Code | 2 |
| Mounting | Subplate/Manifold Mount |
| Electrical Options Code | None |
| Function | 2-Position Spring Centered, End to Center, Single End |
| Flow Direction Code | 4 |
| Center Position | All Ports Blocked |
| Coil Type Code | None |
| Port Restrictor Plugs | None |
| Mechanical Options | None |
| Model No. | DG4S4-012B-H-60 |
| Overrides | No Overrides |
| Response Time | 50 to 80 ms |
| Rated Flow [Max] | 24 gal/min |
| No. of Stages | Single Stage |
| Response Type | Standard Response |
| Pressure [Max] | 4500 psi |
| Watt Rating | 30 W |
| Indicator Lights | No |
| Body Material | Gray Iron |
| Actuation Identification | Solenoid B |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Operation | Solenoid Operated |
| Fluid Cleanliness | 19/17/14 micron |
| Coil Type | Flying Leads |
| Spool Spring Arrangement Code | B |
| Temperature Range [Max] | 122 °F |
| Seal Material | Buna-N |
| Valve Type | Standard-Duty |
| Design No. | 60 |
| Electrical Options | None |
| Compatible Fluids | Petroleum Oil |
| Performance | Standard Performance |
| Surge Suppressor/Damper | None |
| Pilot/Drain | None |
| Electrical Connection | KU W/ Deutsch Connector |
| Cycle Rate [Max] | N/A |
| Coil Rating Code | H |
| Pressure Port Check Valve Pressure | N/A |
| Crossover | All Ports Blocked |
| Reducer Module | N/A |
| Port T Pressure Rating | 1000 psi |
| Tank Port Rating | 1000 |
| Temperature Range [Min] | 68 °F |
| Actuator Type | Solenoid |
| AC/DC | DC |
| Voltage & Frequency | 24 VDC |
| Leakage | Standard Performance |
| Weight | 10.0 LB |
