These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
PA5
Electrical Options
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Port Restrictor Plug Code
None
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Spool Code
2
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Function Code
2
Pressure Port Check Valve Pressure
N/A
Port T Pressure Rating
3000 psi
Coil Rating Code
H
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Manual Override Option Code
None
Overrides
No Overrides
NFPA Size
D03
Mechanical Options
None
Center Position
All Ports Blocked
Solenoid
Single
Crossover
All Ports Blocked
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper
None
Solenoid Code
H
Design No.
60
AC/DC
DC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Indicator Lights
Yes
Pilot Valve Type
N/A
Electrical Connection
Five Pin Connector
Coil Type Code
F
EN Code
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
Actuator Type
Solenoid
Valve Type
High-Performance
Port T Code
7
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Response Type
Standard Response
Spool Shift Timing
N/A
Spool Spring Arrangement Code
AL
Housing Code
W
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
