These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Port Restrictor Plugs
None
Electrical Options
None
Surge Suppressor/Damper Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
No
EN Code
None
Surge Suppressor/Damper
None
Function
2-Position Spring Offset, End to End
Cycle Rate [Max]
N/A
Housing Code
W
Electrical Connection
Wired Terminal Block
Response Type
Standard Response
Solenoid Code
B
Center Position
All Ports Blocked
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Electrical Connector Code
T
Port T Code
2
Spool Indicator Switch Code
S5
Actuator Type
Solenoid
Spool Spring Arrangement Code
A
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Reducer Module
N/A
Solenoid
Single
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Design No.
60
Valve Type
High-Performance
NFPA Size
D03
Coil Rating Code
B
AC/DC
AC
Function Code
2
Pilot Valve Type
N/A
Coil Type Code
F
Solenoid Indicator Lights Code
None
Port T Pressure Rating
150 psi
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Spool Code
2
Solenoid Energization Code
None
Pilot/Drain
None
Seal Material
Buna-N
Crossover
All Ports Blocked
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back