These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Coil Type Code
F
Solenoid Indicator Lights Code
None
EN Code
None
Function Code
2
Voltage & Frequency
110/120 VAC – 50/60 Hz
Manual Override Option Code
None
Solenoid Code
B
Spool Shift Timing
N/A
Spool Spring Arrangement Code
A
Solenoid
Single
Port T Pressure Rating
150 psi
Design No.
60
Spool Indicator Switch Code
S5
AC/DC
AC
Operation
Solenoid Operated
Actuator Type
Solenoid
Solenoid Energization Code
None
Surge Suppressor/Damper Code
None
Response Type
Standard Response
Seal Material
Buna-N
Coil Rating Code
B
Center Position
All Ports Blocked
Spool Code
2
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Electrical Connection
Wired Terminal Block
Mechanical Options
None
Port T Code
2
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
Housing Code
W
Indicator Lights
No
NFPA Size
D03
Surge Suppressor/Damper
None
Pilot/Drain
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Valve Type
High-Performance
Pressure [Max]
5075 psi
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Electrical Options
None
Port Restrictor Plugs
None
Electrical Connector Code
T
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back