- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port T Pressure Rating | 1000 psi |
| Mechanical Options | None |
| Actuator Type | Solenoid |
| Spool Code | 0 |
| Port Restrictor Plugs | None |
| Mechanical Options Code | None |
| Electrical Connection | DIN 43650 |
| Temperature Range [Max] | 122 °F |
| Coil Type Code | U |
| Flow Direction Code | 4 |
| Coil Rating Code | D |
| Crossover | All Ports Open |
| Spool Spring Arrangement Code | C |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Compatible Fluids | Petroleum Oil |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| Response Time | 20 to 40 ms |
| Manual Override | Plain Override |
| No. of Stages | Single Stage |
| Indicator Lights | No |
| Temperature Range [Min] | 68 °F |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Mounting | Subplate/Manifold Mount |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Electrical Options Code | None |
| Center Position | All Ports Open |
| Electrical Options | None |
| Operation | Solenoid Operated |
| Reducer Module | N/A |
| Tank Port Rating | 1000 |
| Function | 3-Position Spring Centered, Double End |
| Leakage | Standard Performance |
| Seal Material | Buna-N |
| Surge Suppressor/Damper | None |
| Fluid Cleanliness | 19/17/14 micron |
| Pilot/Drain | None |
| Rated Flow [Max] | 24 gal/min |
| AC/DC | AC |
| Solenoid | Double |
| Design No. | 60 |
| Body Material | Gray Iron |
| Actuation Identification | Solenoid A, Solenoid B |
| Performance | Standard Performance |
| Pressure [Max] | 6500 psi |
| Pressure Port Check Valve Pressure | N/A |
| Model No. | DG4S4-010C-U-D-60 |
| Weight | 10.0 LB |

