These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Overrides
No Overrides
Housing Code
None
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Electrical Connector Code
None
Pilot/Drain
None
Cycle Rate [Max]
N/A
Voltage & Frequency
12 VDC
Function
3-Position Spring Centered
Seal Material
Buna-N
Spool Code
8
Spool Shift Timing
N/A
Actuator Type
Solenoid
Port Restrictor Plug Code
None
Reducer Module
N/A
Spool Spring Arrangement Code
C
Coil Type Code
SP2
Port T Code
7
Solenoid
Double
AC/DC
DC
Solenoid Energization Code
V
Manual Override Option Code
None
Coil Type
Dual 6.3 mm Spade
Solenoid Code
G
Electrical Options
None
Center Position
P to T, A & B Blocked
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Electrical Connection
No Connector
Valve Type
High-Performance
Function Code
8
Coil Rating Code
G
Mechanical Options
None
Port Restrictor Plugs
None
Crossover
All Ports Open, Restricted
Pilot Valve Type
N/A
Design No.
61
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
EN Code
None
Indicator Lights
No
Response Type
Standard Response
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
