These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Center Position
P to T, A & B Blocked
Pressure [Max]
5075 psi
Crossover
All Ports Open, Restricted
Rated Flow [Max]
21 gal/min
Overrides
No Overrides
Pilot/Drain
None
Housing Code
None
Function Code
8
Solenoid Code
G
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Design No.
61
Pilot Valve Type
N/A
Function
3-Position Spring Centered
Mechanical Options
None
Valve Type
High-Performance
Spool Shift Timing
N/A
Voltage & Frequency
12 VDC
Port Restrictor Plugs
None
Indicator Lights
No
Solenoid Energization Code
V
Response Type
Standard Response
Coil Type Code
SP2
NFPA Size
D03
Surge Suppressor/Damper
None
Coil Rating Code
G
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Coil Type
Dual 6.3 mm Spade
Actuator Type
Solenoid
Electrical Connector Code
None
Electrical Connection
No Connector
Surge Suppressor/Damper Code
None
Electrical Options
None
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Spool Code
8
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Port T Code
7
Operation
Solenoid Operated
EN Code
None
Solenoid Indicator Lights Code
None
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
