These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Wired Terminal Block
Function
3-Position Spring Centered
Pressure [Max]
5075 psi
Response Type
Standard Response
Surge Suppressor/Damper
None
Solenoid Code
HL
Mechanical Options
None
Port Restrictor Plug Code
None
Electrical Options
None
Solenoid Energization Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Spool Shift Timing
N/A
Design No.
60
Crossover
P Blocked, A or B to T
Function Code
6
AC/DC
DC
Seal Material
Buna-N
Manual Override Option Code
None
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Coil Type Code
F
Actuator Type
Solenoid
EN Code
None
Spool Spring Arrangement Code
C
Housing Code
W
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Port T Code
7
Reducer Module
N/A
Spool Code
6
Operation
Solenoid Operated
Solenoid Indicator Lights Code
L
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
24 VDC, Low Power Coil
Solenoid
Double
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Pilot/Drain
None
Electrical Connector Code
T
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Coil Rating Code
HL
Port T Pressure Rating
3000 psi
Indicator Lights
Yes
Overrides
No Overrides
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back