These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Energization Code
None
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Port T Code
7
Operation
Solenoid Operated
Voltage & Frequency
24 VDC, Low Power Coil
Indicator Lights
Yes
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
EN Code
None
Valve Type
High-Performance
Electrical Connection
Wired Terminal Block
Port Restrictor Plugs
None
AC/DC
DC
Overrides
No Overrides
Function Code
6
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Electrical Options
None
Reducer Module
N/A
Coil Rating Code
HL
Seal Material
Buna-N
Coil Type Code
F
Spool Shift Timing
N/A
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Center Position
P Blocked, A & B to T
Solenoid Code
HL
Solenoid
Double
Mechanical Options
None
Electrical Connector Code
T
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
L
Design No.
60
Crossover
P Blocked, A or B to T
Surge Suppressor/Damper
None
Response Type
Standard Response
Function
3-Position Spring Centered
Spool Code
6
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Housing Code
W
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back