These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Solenoid
Double
Port T Code
6
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Mechanical Options
None
EN Code
None
AC/DC
AC
Electrical Connection
Five Pin Connector
Electrical Connector Code
PA5
Actuator Type
Solenoid
Solenoid Code
B
Pressure Port Check Valve Pressure
N/A
Indicator Lights
Yes
Pilot Valve Type
N/A
Spool Code
66
Solenoid Energization Code
None
Operation
Solenoid Operated
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Port T Pressure Rating
3000 psi
Function
3-Position Spring Centered
Solenoid Indicator Lights Code
L
Port Restrictor Plug Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Function Code
66
Seal Material
Buna-N
Design No.
60
Surge Suppressor/Damper
None
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
NFPA Size
D03
Port Restrictor Plugs
None
Center Position
P Blocked, A & B to T
Coil Rating Code
B
Electrical Options
None
Manual Override Option Code
H
Crossover
P Blocked, A or B to T
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Coil Type Code
F
Response Type
Standard Response
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Spool Indicator Switch Code
None
Overrides
No Overrides
Housing Code
W
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back