Find a Service Center
- SV1-10-3 Series 3-Way, 2-Position Direct Acting Solendoid Cartridge Valve
- Spool Type
- 6 gal/min
- C-10-3 Cavity
- Aluminum Housing
description
- Three-way, two-position, direct-acting, spool-type screw-in cartridge solenoid valve. In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 1 to port 3 while port 2 is blocked.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Housing Material | Aluminum |
| Pressure [Max] | 3000 psi |
| Coil Series | Use J Series, 23 W |
| Manual Override | No Manual Override |
| Housing No. | 566162 |
| Poppet/Spool | Spool |
| Valve Type | 3-Way, Spool |
| Series | SV1-10-3 |
| Bi-Directional (2-Way Valves) | No |
| Operation | Solenoid Operated |
| Cartridge Valve Series | SV1-10-3 |
| Cavity | C-10-3 |
| Connector Type | Conduit |
| Seal Kit Viton | 889688 |
| Flow [Max] | 6 gal/min |
| Port Type | SAE |
| Temperature Range [Max] | 248 °F |
| Size Designation | 10 |
| Port Size | SAE-6 |
| Temperature Range [Min] | -40 °F |
| Actuation | Direct Acting |
| Valve Voltage Rating | 24 VDC |
| Seal Material | Buna-N |
| Seal Kit Buna | 889624 |
| Filter Option | None |
| Weight | 0.0 LB |
