Find a Service Center
- SV1-10-3 Series 3-Way, 2-Position Direct Acting Solendoid Cartridge Valve
- Spool Type
- 6 gal/min
- C-10-3 Cavity
- Aluminum Housing
description
- Three-way, two-position, direct-acting, spool-type screw-in cartridge solenoid valve. In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 1 to port 3 while port 2 is blocked.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Connector Type | Conduit |
| Series | SV1-10-3 |
| Actuation | Direct Acting |
| Filter Option | None |
| Temperature Range [Min] | -40 °F |
| Port Size | SAE-6 |
| Temperature Range [Max] | 248 °F |
| Manual Override | No Manual Override |
| Seal Material | Buna-N |
| Operation | Solenoid Operated |
| Housing Material | Aluminum |
| Flow [Max] | 6 gal/min |
| Housing No. | 566162 |
| Seal Kit Buna | 889624 |
| Port Type | SAE |
| Cavity | C-10-3 |
| Bi-Directional (2-Way Valves) | No |
| Coil Series | Use J Series, 23 W |
| Pressure [Max] | 3000 psi |
| Seal Kit Viton | 889688 |
| Valve Voltage Rating | 24 VDC |
| Valve Type | 3-Way, Spool |
| Cartridge Valve Series | SV1-10-3 |
| Poppet/Spool | Spool |
| Size Designation | 10 |
| Weight | 0.0 LB |
