Find a Service Center
- Pressure Control Valve
- Pressure Reducing/Relieving Valve Type
- PRV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Operating Pressure [Max] | 2300 psi |
| No. of Valve Ports | 3 |
| Housing Material | Cartridge Only |
| Model No. | PRV1-10V-K-0-2/ |
| Installation | Screw-in Cartridge |
| Seal Material | Viton |
| Valve Material | Cartridge only |
| Cavity | C-10-3 |
| Temperature Range [Min] | -40 °F |
| No. of Housing Ports | 3 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Cracking Pressure [Min] | 50 psi |
| Seal Kit Buna | 565804 |
| Pressure [Max] | 2300 psi |
| Temperature Range [Max] | 248 °F |
| Style | Spool |
| Body Type | 2 |
| Pilot Ratio | 100:1 |
| Adjustment Type | Knob |
| Port Size | Cartridge Only |
| Port Type | Cartridge Only |
| Manufacturer Part No. | PRV1-10V-K-0-2/ |
| Operating Pressure [Min] | 51 psi |
| Type | Pressure Reducing/Relieving Valve |
| Operation | Direct Acting |
| Seal Kit Viton | 889599 |
| Pressure Setting | 125 psi |
| Recommend Filtration Level | 18/16/13 microns |
| Cracking Pressure [Max] | 200 psi |
| Flow [Max] | 4 gal/min |
| Series | PRV1-10 |
| Leakage | 0.25 cc/min |
| Weight | 0.54 LB |
