02-301621

Vickers D05 Solenoid Valve

Item #102087877

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

These hoses can be used to convey hazardous chemicals, steam, hot liquids or other dangerous materials which can cause death, serious bodily injury including burns, pressure wounds or chemical exposure if released accidentally. They should, therefore, onl

Specifications

Spool Code	0
Voltage & Frequency	110/120 VAC - 50/60 Hz
Design No.	60
Rated Flow [Max]	25 gal/min
Response Type	Standard Response
Electrical Connection	KU W/ Deutsch Connector
Crossover	All Ports Open
Mechanical Options	Single Solenoid Reverse Assembly
Surge Suppressor/Damper	None
Mechanical Options Code	LH
Actuator Type	Solenoid
Model No.	DG4S4W-010B-B-60-LH
Port Restrictor Plugs	None
Seal Material	Buna-N
Indicator Lights	No
Pilot/Drain	None
Electrical Options Code	W
Spool Spring Arrangement Code	B
Overrides	No Overrides
Solenoid	Single
Pilot Valve Type	N/A
Coil Type	Flying Leads
Operation	Solenoid Operated
Port T Pressure Rating	1000 psi
Flow Direction Code	4
Pressure [Max]	3600 psi
Electrical Options	None
NFPA Size	D05
Tank Port Rating	1000
AC/DC	AC
Reducer Module	N/A
Cycle Rate [Max]	N/A
Coil Type Code	None
Function	2-Position Spring Centered, End to Center, Single End
Center Position	All Ports Open
Coil Rating Code	B
Pressure Port Check Valve Pressure	N/A
Valve Type	Standard-Duty
Weight	10.0 LB