02-304569

Vickers D05 Solenoid Valve

Item #102087468

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

AC/DC	AC
Design No.	60
Electrical Connection	DIN 43650
Flow Direction Code	4
Overrides	No Overrides
Tank Port Rating	1000
Coil Type Code	U
Pilot Valve Type	N/A
Crossover	All Ports Blocked
Model No.	DG4S4-012B-U-D-60
Mechanical Options Code	None
Voltage & Frequency	220 VAC - 50 Hz
Electrical Options Code	None
Electrical Options	None
Reducer Module	N/A
Valve Type	Standard-Duty
Seal Material	Buna-N
Solenoid	Single
Port Restrictor Plugs	None
Coil Rating Code	D
Coil Type	ISO 4400 (Din 43650) Connector
Cycle Rate [Max]	N/A
Spool Code	2
Operation	Solenoid Operated
NFPA Size	D05
Indicator Lights	No
Port T Pressure Rating	1000 psi
Pressure Port Check Valve Pressure	N/A
Response Type	Standard Response
Spool Spring Arrangement Code	B
Rated Flow [Max]	25 gal/min
Mechanical Options	None
Function	2-Position Spring Centered, End to Center, Single End
Center Position	All Ports Blocked
Surge Suppressor/Damper	None
Pressure [Max]	3600 psi
Pilot/Drain	None
Actuator Type	Solenoid
Weight	10.0 LB