These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
Electrical Connector Code
None
Response Type
Standard Response
Solenoid
Single
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Seal Material
Buna-N
Coil Rating Code
H
Spool Indicator Switch Code
S5
Mechanical Options
None
Crossover
All Ports Open
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Spool Code
0
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to End
AC/DC
DC
Port Restrictor Plug Code
None
Port T Code
2
Pressure [Max]
5075 psi
Housing Code
W
Electrical Options
None
Surge Suppressor/Damper
None
Center Position
All Ports Open
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
A
Valve Type
High-Performance
Solenoid Code
H
Reducer Module
N/A
Manual Override Option Code
None
Electrical Connection
No Connector
Coil Type Code
F
EN Code
None
Pilot/Drain
None
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
NFPA Size
D03
Solenoid Energization Code
None
Function Code
0
Actuator Type
Solenoid
Pilot Valve Type
N/A
Overrides
No Overrides
Design No.
60
Port T Pressure Rating
150 psi
Voltage & Frequency
24 VDC
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
