These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Spool Spring Arrangement Code
A
Spool Code
0
Indicator Lights
No
Surge Suppressor/Damper
None
Response Type
Standard Response
Design No.
60
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to End
Port T Pressure Rating
150 psi
Pressure [Max]
5075 psi
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Center Position
All Ports Open
Electrical Connector Code
None
AC/DC
DC
Actuator Type
Solenoid
Function Code
0
Housing Code
W
Voltage & Frequency
24 VDC
Coil Type Code
F
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Port T Code
2
Solenoid Energization Code
None
Mechanical Options
None
Manual Override Option Code
None
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Solenoid
Single
Electrical Connection
No Connector
Spool Indicator Switch Code
S5
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Port Restrictor Plugs
None
Electrical Options
None
Spool Shift Timing
N/A
EN Code
None
Solenoid Code
H
Seal Material
Buna-N
Valve Type
High-Performance
Coil Rating Code
H
Crossover
All Ports Open
Port Restrictor Plug Code
None
NFPA Size
D03
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
