These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
AC
Electrical Connection
DIN 43650
NFPA Size
D03
Function Code
6
Rated Flow [Max]
21 gal/min
Solenoid
Double
Pilot/Drain
None
Reducer Module
N/A
Housing Code
None
Port Restrictor Plug Code
None
Port T Code
6
Response Type
Standard Response
Mechanical Options
None
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Surge Suppressor/Damper
None
Overrides
No Overrides
Manual Override Option Code
H
Pilot Valve Type
N/A
Indicator Lights
No
Function
3-Position Detented
Design No.
60
Spool Indicator Switch Code
None
Electrical Options
None
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
DIN 43650
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Actuator Type
Solenoid
Operation
Solenoid Operated
Electrical Connector Code
None
Solenoid Code
B
Spool Spring Arrangement Code
N
Coil Rating Code
B
Center Position
P Blocked, A & B to T
EN Code
None
Seal Material
Buna-N
Crossover
P Blocked, A or B to T
Spool Code
6
Coil Type Code
U
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
