These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Operation
Solenoid Operated
NFPA Size
D03
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Pilot Valve Type
N/A
Pilot/Drain
None
Solenoid Code
G
Electrical Connection
No Connector
Center Position
All Ports Blocked
Overrides
No Overrides
Coil Type
Top Exit Flying Leads
Indicator Lights
No
Function Code
2
EN Code
None
AC/DC
DC
Valve Type
High-Performance
Function
3-Position Spring Centered
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Coil Rating Code
G
Electrical Options
None
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Voltage & Frequency
12 VDC
Design No.
60
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Port T Code
7
Spool Code
2
Manual Override Option Code
None
Housing Code
None
Solenoid Energization Code
None
Crossover
All Ports Blocked
Electrical Connector Code
None
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Solenoid
Double
Coil Type Code
KU
Mechanical Options
None
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Response Type
Standard Response
Spool Spring Arrangement Code
C
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
