These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Solenoid Energization Code
None
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Center Position
P Blocked, A & B to T
Coil Type Code
F
Electrical Options
None
Electrical Connection
Wired Terminal Block
Function Code
6
Cycle Rate [Max]
N/A
Design No.
60
Reducer Module
N/A
Solenoid Indicator Lights Code
L
Spool Code
6
Spool Indicator Switch Code
None
Response Type
Standard Response
Port T Code
7
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
N
AC/DC
DC
Surge Suppressor/Damper Code
None
NFPA Size
D03
Housing Code
W
Crossover
P Blocked, A or B to T
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
H
Electrical Connector Code
T
Valve Type
High-Performance
Solenoid Code
H
Manual Override Option Code
None
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Mechanical Options
None
Spool Shift Timing
N/A
EN Code
None
Overrides
No Overrides
Function
3-Position Detented
Operation
Solenoid Operated
Solenoid
Double
Voltage & Frequency
24 VDC
Indicator Lights
Yes
Seal Material
Buna-N
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
