Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pressure [Max] | 3600 psi |
| Spool Spring Arrangement Code | C |
| Port T Pressure Rating | 1000 psi |
| AC/DC | DC |
| NFPA Size | D05 |
| Response Type | Standard Response |
| Design No. | 60 |
| Surge Suppressor/Damper | None |
| Center Position | All Ports Blocked |
| Reducer Module | N/A |
| Rated Flow [Max] | 25 gal/min |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Flow Direction Code | 4 |
| Pressure Port Check Valve Pressure | N/A |
| Voltage & Frequency | 24 VDC |
| Port Restrictor Plugs | None |
| Coil Type Code | U1 |
| Mechanical Options | None |
| Electrical Options | None |
| Crossover | All Ports Blocked |
| Operation | Solenoid Operated |
| Function | 3-Position Spring Centered |
| Actuator Type | Solenoid |
| Coil Rating Code | H |
| Electrical Connection | Lead Wires |
| Seal Material | Buna-N |
| Spool Code | 2 |
| Pilot/Drain | None |
| Mechanical Options Code | None |
| Solenoid | Double |
| Pilot Valve Type | N/A |
| Cycle Rate [Max] | N/A |
| Indicator Lights | No |
| Electrical Options Code | None |
| Coil Type | Connector Fitted |
| Weight | 10.0 LB |
