These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Solenoid Indicator Lights Code
None
Reducer Module
N/A
Center Position
All Ports Open
Rated Flow [Max]
21 gal/min
Spool Code
0
Spool Spring Arrangement Code
BL
Actuator Type
Solenoid
Solenoid Code
B
EN Code
EN21
Pressure [Max]
5075 psi
Voltage & Frequency
110/120 VAC – 50/60 Hz
Overrides
No Overrides
Manual Override Option Code
None
Port T Pressure Rating
3000 psi
Electrical Options
None
Port Restrictor Plugs
1 mm Diameter - P Port
Design No.
60
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Indicator Lights
No
Solenoid Energization Code
None
Solenoid
Single
AC/DC
AC
Operation
Solenoid Operated
Coil Type
DIN 43650
Spool Shift Timing
N/A
Seal Material
Buna-N
Coil Rating Code
B
Surge Suppressor/Damper Code
None
Crossover
All Ports Open
NFPA Size
D03
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Pilot Valve Type
N/A
Mechanical Options
None
Housing Code
None
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Function
2-Position Spring Offset, End to Center
Port Restrictor Plug Code
P10
Electrical Connector Code
None
Port T Code
6
Pilot/Drain
None
Surge Suppressor/Damper
None
Coil Type Code
U
Function Code
0
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
