These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Voltage & Frequency
110/120 VAC – 50/60 Hz
Rated Flow [Max]
21 gal/min
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Open
Electrical Connection
DIN 43650
Spool Indicator Switch Code
None
Coil Rating Code
B
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Solenoid Energization Code
None
EN Code
EN21
Center Position
All Ports Open
Indicator Lights
No
Solenoid
Single
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Overrides
No Overrides
Mechanical Options
None
Port Restrictor Plug Code
P10
Function
2-Position Spring Offset, End to Center
Function Code
0
Port T Code
6
Valve Type
High-Performance
Response Type
Standard Response
Coil Type Code
U
Solenoid Code
B
Electrical Connector Code
None
Port Restrictor Plugs
1 mm Diameter - P Port
Seal Material
Buna-N
Spool Code
0
Manual Override Option Code
None
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Reducer Module
N/A
NFPA Size
D03
Design No.
60
Spool Spring Arrangement Code
BL
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
AC/DC
AC
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Housing Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
