02-356271

Vickers D05 Solenoid Valve

Item #101910626

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Port T Pressure Rating	1000 psi
Cycle Rate [Max]	N/A
Center Position	All Ports Open
Coil Rating Code	B
Coil Type Code	None
Mechanical Options Code	LH
Flow Direction Code	4
Rated Flow [Max]	25 gal/min
Spool Code	0
Coil Type	Flying Leads
Port Restrictor Plugs	None
Design No.	60
Spool Spring Arrangement Code	B
Valve Type	Standard-Duty
Voltage & Frequency	110/120 VAC - 50/60 Hz
Tank Port Rating	1000
Function	2-Position Spring Centered, End to Center, Single End
Actuator Type	Solenoid
Crossover	All Ports Open
Operation	Solenoid Operated
Electrical Options	None
AC/DC	AC
Pressure [Max]	3600 psi
Seal Material	Buna-N
Solenoid	Single
Surge Suppressor/Damper	None
Response Type	Standard Response
NFPA Size	D05
Electrical Options Code	None
Mechanical Options	Single Solenoid Reverse Assembly
Electrical Connection	KU W/ Deutsch Connector
Pressure Port Check Valve Pressure	N/A
Indicator Lights	No
Pilot Valve Type	N/A
Overrides	No Overrides
Model No.	DG4S4-010B-B-60-LH
Pilot/Drain	None
Reducer Module	N/A
Weight	10.0 LB