Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| AC/DC | AC |
| Pilot/Drain | None |
| Indicator Lights | No |
| Response Time | 20 to 40 ms |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Model No. | DG4S4-013B-B-60-LH |
| No. of Stages | Single Stage |
| Port T Pressure Rating | 1000 psi |
| Crossover | All Ports Blocked, or P & B Blocked, A to T |
| Seal Material | Buna-N |
| Performance | Standard Performance |
| Coil Type Code | None |
| Pressure [Max] | 9500 psi |
| Spool Code | 3 |
| Solenoid | Single |
| Pilot Valve Type | N/A |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Temperature Range [Max] | 122 °F |
| Tank Port Rating | 1000 |
| Actuator Type | Solenoid |
| Cycle Rate [Max] | N/A |
| Actuation Identification | Solenoid B |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Operation | Solenoid Operated |
| Mounting | Subplate/Manifold Mount |
| Electrical Options Code | None |
| Reducer Module | N/A |
| Design No. | 60 |
| Temperature Range [Min] | 68 °F |
| Function | 2-Position Spring Centered, End To Center |
| Electrical Options | None |
| Center Position | P & B Blocked, A to T |
| NFPA Size | D05 |
| Manual Override | Plain Override |
| Pressure Port Check Valve Pressure | N/A |
| Response Type | Standard Response |
| Mechanical Options Code | LH |
| Spool Spring Arrangement Code | B |
| Leakage | Standard Performance |
| Flow Direction Code | 4 |
| Rated Flow [Max] | 24 gal/min |
| Overrides | No Overrides |
| Compatible Fluids | Petroleum Oil |
| Coil Rating Code | B |
| Coil Type | Flying Leads |
| Fluid Cleanliness | 19/17/14 micron |
| Body Material | Gray Iron |
| Surge Suppressor/Damper | None |
| Port Restrictor Plugs | None |
| Weight | 10.0 LB |
