Find a Service Center
- PVM045 Series Industrial Axial Piston Pump
- CW Rotation
- 0.86 in 13T Splined Shaft
- SAE B, 2 Bolt w/4 in Pilot
- 20 gal/min @ 1800 rpm
description
- Open circuit, axial piston designs that feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size that allows installation in tighter locations. Capable of operating with many types of hydraulic fluids used in industrial and mobile systems. High water content and phosphate ester fluids can be accommodated, in addition to the typical petroleum-based and synthetic fluids.
applications
- Metal shears
- Material conveyors
- Automotive transfer lines
- Process industry machines
- Flight simulators
- Entertainment rides
- Tube forming and bending
- Blow molding machines
- Metal die casters
features
- Compact design
- Inlet and outlet gauge ports and adjustable maximum displacement stops
- Low 4% pressure ripple
- Long pump life
- Quiet pump operation
- Reduced maintenance
- Design promotes leak-free system
| Operating Pressure [Max] | 5000 psi |
| Pump Type | Open Circuit Axial |
| Inlet Port | 2 in 4-Bolt Flange/Code 61 |
| GPM @ Speed | 20 gpm @ 1800 rpm |
| Port Location | Side Port |
| Model No. | PVM045ER07CS02AAC07110000A0A |
| Manufacturer Part No. | PVM045ER07CS02AAC07110000A0A |
| Origin | Axial Piston Pumps |
| Shaft Dia. | 0.86 in |
| Special Features | Adjustable Maximum Displacement Stop & Single Shaft Seal |
| Valve Plate | Electric Motor Speeds |
| Series | PVM045 |
| Shaft Length | 33 mm |
| Pilot Diameter | 4 in |
| Control Type | Pressure & Flow Compensator w/Plugged Orifice |
| Spline Description | 16/32 |
| Shaft Details | 13T-16/32 |
| Mounting Flange | SAE B, 2 Bolt |
| Outlet Port | 1 in 4-Bolt Flange/Code 61 |
| RPM [Max] | 1800 rpm |
| Bolt Circle Dia. | 5 3/4 in |
| Displacement (in³/rev) | 2.75 |
| Flow @ RPM | 11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm |
| Pressure Compensator Setting | 70 Bar |
| Rotation | Right Hand (CW) |
| Shaft Description | SAE B |
| HP @ 1,800 rpm [Max] | 55 hp |
| Seal Material | Buna-N |
| Shaft Type | 13 Tooth Splined |
| Port Type | Flange Ports |
| Flow Compensator Setting | 11 Bar |
| Paint | Standard Blue Paint |
| Auxiliary Mounting Pad | Single Pump, Non-Thru-Drive |
| Key | N/A |
| Weight | 52.0 LB |
