Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Connection | Ground Terminal |
| Pressure [Max] | 3000 psi |
| Overrides | No Overrides |
| Solenoid Air Gap Code | None |
| Coil Type | No Coil |
| Indicator Lights | No |
| Crossover | P Blocked, A or B to T |
| NFPA Size | D05 |
| Mechanical Options | None |
| Electrical Options | None |
| Electrical Options Code | None |
| Pilot/Drain | None |
| Port Restrictor Plugs | None |
| Solenoid | Double |
| Coil Rating Code | None |
| Center Position | P Blocked, A & B to T |
| Pilot Valve Type | N/A |
| Rated Flow [Max] | 20 gal/min |
| Valve Type | Standard-Duty |
| Reducer Module | N/A |
| Design No. | 50 |
| Pressure Port Check Valve Pressure | N/A |
| Mechanical Options Code | None |
| Port T Pressure Rating | 1000 psi |
| Flow Direction Code | 4 |
| Model No. | DG4S4-016C-460AC-60-50 |
| Function | 3-Position Spring Centered |
| Cycle Rate [Max] | N/A |
| Spool Code | 6 |
| Voltage & Frequency | 460 VAC - 60 Hz |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | C |
| Tank Port Rating | 1000 |
| Seal Material | Buna-N |
| Response Type | Standard Response |
| AC/DC | AC |
| Actuator Type | Solenoid |
| Operation | Solenoid Operated |
| Weight | 10.0 LB |
