Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Options Code | None |
| AC/DC | DC |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| Solenoid Air Gap Code | None |
| Pilot Valve Type | N/A |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Pressure Port Check Valve Pressure | N/A |
| Spool Spring Arrangement Code | A |
| Port T Pressure Rating | 1000 psi |
| Design No. | 50 |
| Rated Flow [Max] | 20 gal/min |
| Solenoid | Single |
| Cycle Rate [Max] | N/A |
| Coil Rating Code | None |
| Port Restrictor Plugs | None |
| Operation | Solenoid Operated |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 48 VDC |
| Mechanical Options | None |
| Actuator Type | Solenoid |
| Electrical Connection | Ground Terminal |
| Seal Material | Buna-N |
| Reducer Module | N/A |
| Center Position | All Ports Blocked |
| Pilot/Drain | None |
| Electrical Options | None |
| Crossover | All Ports Blocked |
| Pressure [Max] | 3000 psi |
| Mechanical Options Code | None |
| Response Type | Standard Response |
| Flow Direction Code | 4 |
| Spool Code | 2 |
| Coil Type | No Coil |
| Overrides | No Overrides |
| Weight | 10.0 LB |
