Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Voltage & Frequency | 48 VDC |
| Design No. | 50 |
| Reducer Module | N/A |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Center Position | All Ports Blocked |
| Crossover | All Ports Blocked |
| Pilot Valve Type | N/A |
| Pilot/Drain | None |
| Electrical Options | None |
| Solenoid Air Gap Code | None |
| Operation | Solenoid Operated |
| NFPA Size | D05 |
| Coil Rating Code | None |
| Overrides | No Overrides |
| Rated Flow [Max] | 20 gal/min |
| Function | 2-Position Spring Offset |
| Mechanical Options | None |
| Port T Pressure Rating | 1000 psi |
| Flow Direction Code | 4 |
| Valve Type | Standard-Duty |
| Coil Type | No Coil |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid | Single |
| Port Restrictor Plugs | None |
| Indicator Lights | No |
| Electrical Connection | Ground Terminal |
| Spool Code | 2 |
| Spool Spring Arrangement Code | A |
| AC/DC | DC |
| Surge Suppressor/Damper | None |
| Pressure [Max] | 3000 psi |
| Electrical Options Code | None |
| Weight | 10.0 LB |
