Find a Service Center
- D05 Double Solenoid Operated Valve
- 12 VDC
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mechanical Options Code | None |
| Voltage & Frequency | 12 VDC |
| Operation | Solenoid Operated |
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Design No. | 50 |
| Seal Material | Buna-N |
| Electrical Options | None |
| Crossover | P Blocked, A or B to T |
| Flow Direction Code | 4 |
| Pilot/Drain | None |
| Reducer Module | N/A |
| Spool Code | 6 |
| Cycle Rate [Max] | N/A |
| Coil Rating Code | None |
| Spool Spring Arrangement Code | C |
| Pilot Valve Type | N/A |
| Pressure [Max] | 3000 psi |
| Valve Type | Standard-Duty |
| Solenoid | Double |
| Center Position | P Blocked, A & B to T |
| Electrical Connection | Ground Terminal |
| Solenoid Air Gap Code | None |
| Response Type | Standard Response |
| Indicator Lights | No |
| Surge Suppressor/Damper | None |
| NFPA Size | D05 |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Coil Type | No Coil |
| Mechanical Options | None |
| Electrical Options Code | None |
| Port T Pressure Rating | 1000 psi |
| Rated Flow [Max] | 20 gal/min |
| Function | 3-Position Spring Centered |
| AC/DC | DC |
| Weight | 10.0 LB |
