- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Function | 3-Position Detented |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Center Position | All Ports Blocked |
| Surge Suppressor/Damper | None |
| Response Type | Standard Response |
| Cycle Rate [Max] | N/A |
| Port Restrictor Plugs | None |
| Coil Rating Code | None |
| Pilot Valve Type | N/A |
| Electrical Connection | Ground Terminal |
| Actuator Type | Solenoid |
| Mechanical Options Code | None |
| Operation | Solenoid Operated |
| Spool Code | 2 |
| Design No. | 51 |
| Rated Flow [Max] | 20 gal/min |
| Electrical Options Code | L |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Solenoid | Double |
| Crossover | All Ports Blocked |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Pilot/Drain | None |
| Coil Type | No Coil |
| Electrical Options | None |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Pressure [Max] | 3000 psi |
| NFPA Size | D05 |
| Indicator Lights | Yes |
| Solenoid Air Gap Code | None |
| Port T Pressure Rating | 1000 psi |
| Valve Type | Standard-Duty |
| AC/DC | AC |
| Spool Spring Arrangement Code | N |
| Weight | 10.0 LB |

