- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pressure Port Check Valve Pressure | N/A |
| Pilot Valve Type | N/A |
| Port Restrictor Plugs | None |
| Solenoid | Double |
| Electrical Options Code | L |
| Response Type | Standard Response |
| Spool Code | 2 |
| Crossover | All Ports Blocked |
| Spool Spring Arrangement Code | N |
| Reducer Module | N/A |
| Mechanical Options Code | None |
| Electrical Connection | Ground Terminal |
| Center Position | All Ports Blocked |
| Cycle Rate [Max] | N/A |
| Port T Pressure Rating | 1000 psi |
| Indicator Lights | Yes |
| Valve Type | Standard-Duty |
| Electrical Options | None |
| Mechanical Options | None |
| Design No. | 51 |
| Overrides | No Overrides |
| Function | 3-Position Detented |
| AC/DC | AC |
| Operation | Solenoid Operated |
| Actuator Type | Solenoid |
| NFPA Size | D05 |
| Rated Flow [Max] | 20 gal/min |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Pilot/Drain | None |
| Surge Suppressor/Damper | None |
| Coil Rating Code | None |
| Coil Type | No Coil |
| Pressure [Max] | 3000 psi |
| Flow Direction Code | 4 |
| Seal Material | Buna-N |
| Solenoid Air Gap Code | None |
| Weight | 10.0 LB |

