- Pressure Control Valve
- Pressure Sequence Valve Type
- PSV10-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Sequence Pressure [Min] | 400 psi |
| Sequence Pressure [Max] | 2400 psi |
| Temperature Range [Max] | 248 °F |
| No. of Valve Ports | 4 |
| Pressure Setting | 1400 psi |
| Operating Pressure [Max] | 3046 psi |
| Housing Material | Cartridge Only |
| Installation | Screw-in Cartridge |
| Seal Kit Buna | 889625 |
| Pressure [Max] | 3046 psi |
| No. of Housing Ports | 4 |
| Series | PSV10-10 |
| Manufacturer Part No. | PSV10-10-S-0-24 |
| Operating Pressure [Min] | 406 psi |
| Temperature Range [Min] | -40 °F |
| Cavity | C-10-4 |
| Recommend Filtration Level | 18/16/13 microns |
| Seal Material | Buna-N |
| Port Type | Cartridge Only |
| Seal Kit Viton | 566080 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Type | Pressure Sequence Valve |
| Model No. | PSV10-10-S-0-24/ |
| Operation | Direct Acting |
| Pilot Ratio | 100:1 |
| Flow [Max] | 6 gal/min |
| Adjustment Type | Screw |
| Port Size | Cartridge Only |
| Valve Material | Cartridge only |
| Style | Spool |
| Weight | 0.6 LB |

