Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| Pilot/Drain | None |
| Actuator Type | Solenoid |
| Electrical Connection | Ground Terminal |
| Pressure Port Check Valve Pressure | N/A |
| Crossover | All Ports Open |
| Response Type | Standard Response |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Compatible Fluids | Petroleum Oil |
| Flow Direction Code | 4 |
| Performance | Standard Performance |
| Surge Suppressor/Damper | None |
| Model No. | DG4S4-010A-50-LH |
| Rated Flow [Max] | 24 gal/min |
| Valve Type | Standard-Duty |
| Electrical Options | None |
| Cycle Rate [Max] | N/A |
| Spool Spring Arrangement Code | A |
| NFPA Size | D05 |
| Overrides | No Overrides |
| Electrical Options Code | None |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Spool Code | 0 |
| Temperature Range [Max] | 122 °F |
| Temperature Range [Min] | 68 °F |
| Port T Pressure Rating | 1000 psi |
| Leakage | Standard Performance |
| Operation | Solenoid Operated |
| Coil Type | No Coil |
| Indicator Lights | No |
| Reducer Module | N/A |
| Mounting | Subplate/Manifold Mount |
| No. of Stages | Single Stage |
| Solenoid | Single |
| Body Material | Gray Iron |
| Port Restrictor Plugs | None |
| Pilot Valve Type | N/A |
| Tank Port Rating | 1000 |
| Mechanical Options Code | LH |
| Coil Rating Code | None |
| Solenoid Air Gap Code | None |
| Fluid Cleanliness | 19/17/14 micron |
| Manual Override | Plain Override |
| Function | 2-Position Spring Offset |
| Center Position | All Ports Open |
| Pressure [Max] | 12000 psi |
| AC/DC | AC |
| Design No. | 50 |
| Actuation Identification | Solenoid B |
| Weight | 10.0 LB |
