These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
EN Code
None
Port Restrictor Plug Code
None
Port T Pressure Rating
3000 psi
Port T Code
7
Center Position
P Blocked, A & B to T
Housing Code
None
Reducer Module
N/A
Electrical Options
None
Cycle Rate [Max]
N/A
NFPA Size
D03
AC/DC
DC
Overrides
No Overrides
Surge Suppressor/Damper
None
Electrical Connector Code
None
Voltage & Frequency
12 VDC
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Manual Override Option Code
None
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Spool Code
6
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Coil Rating Code
G
Solenoid Code
G
Function
3-Position Spring Centered
Operation
Solenoid Operated
Coil Type Code
U
Response Type
Standard Response
Design No.
60
Function Code
6
Electrical Connection
DIN 43650
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Mechanical Options
None
Seal Material
Buna-N
Solenoid
Double
Crossover
P Blocked, A or B to T
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Coil Type
DIN 43650
Spool Spring Arrangement Code
C
Pilot/Drain
None
Indicator Lights
No
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
