These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
Operation
Solenoid Operated
Voltage & Frequency
12 VDC
Cycle Rate [Max]
N/A
Surge Suppressor/Damper
None
Design No.
60
Spool Indicator Switch Code
None
Response Type
Standard Response
Actuator Type
Solenoid
Indicator Lights
No
Pressure [Max]
5075 psi
Coil Type
DIN 43650
Electrical Connector Code
None
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
EN Code
None
Reducer Module
N/A
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Pilot/Drain
None
Housing Code
None
Seal Material
Buna-N
Crossover
P Blocked, A or B to T
Mechanical Options
None
Port Restrictor Plug Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid Code
G
Solenoid
Double
Overrides
No Overrides
NFPA Size
D03
Center Position
P Blocked, A & B to T
Coil Type Code
U
Solenoid Indicator Lights Code
None
Function Code
6
Coil Rating Code
G
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Manual Override Option Code
None
Spool Code
6
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Electrical Options
None
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Port T Code
7
AC/DC
DC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
