These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
U
Reducer Module
N/A
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Coil Rating Code
A
AC/DC
AC
Electrical Options
None
Housing Code
None
Coil Type
DIN 43650
Pilot/Drain
None
Design No.
60
Solenoid Code
A
EN Code
None
Spool Spring Arrangement Code
AL
Solenoid
Single
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Center Position
All Ports Blocked
Function
2-Position Spring Offset, End to End
Pressure [Max]
5075 psi
Spool Code
2
Electrical Connector Code
None
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Spool Shift Timing
N/A
Surge Suppressor/Damper
None
Port T Code
6
Manual Override Option Code
None
Mechanical Options
None
Response Type
Standard Response
NFPA Size
D03
Voltage & Frequency
110 VAC – 50 Hz
Function Code
2
Seal Material
Buna-N
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Indicator Lights
No
Valve Type
High-Performance
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Crossover
All Ports Blocked
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Overrides
No Overrides
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
