These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
110 VAC – 50 Hz
Overrides
No Overrides
Electrical Connection
DIN 43650
Port Restrictor Plug Code
None
Solenoid
Single
Actuator Type
Solenoid
Mechanical Options
None
AC/DC
AC
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
A
Port T Code
6
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
AL
Response Type
Standard Response
Spool Shift Timing
N/A
EN Code
None
Spool Indicator Switch Code
None
Valve Type
High-Performance
Electrical Options
None
Design No.
60
Cycle Rate [Max]
N/A
Electrical Connector Code
None
Surge Suppressor/Damper
None
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Indicator Lights
No
Pilot Valve Type
N/A
Solenoid Energization Code
None
Coil Type
DIN 43650
Manual Override Option Code
None
Pilot/Drain
None
Spool Code
2
Coil Type Code
U
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Pressure [Max]
5075 psi
Port T Pressure Rating
3000 psi
Center Position
All Ports Blocked
Reducer Module
N/A
Function
2-Position Spring Offset, End to End
Port Restrictor Plugs
None
Crossover
All Ports Blocked
Solenoid Code
A
Function Code
2
Housing Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
