Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Seal Material | Buna-N |
| AC/DC | DC |
| Overrides | No Overrides |
| Pilot/Drain | None |
| Design No. | 60 |
| Voltage & Frequency | 12 VDC |
| Electrical Options | None |
| Electrical Options Code | None |
| Spool Spring Arrangement Code | A |
| Electrical Connection | DIN 43650 |
| Operation | Solenoid Operated |
| Mechanical Options Code | None |
| Pilot Valve Type | N/A |
| Spool Code | 2 |
| Flow Direction Code | 4 |
| Cycle Rate [Max] | N/A |
| Surge Suppressor/Damper | None |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Coil Rating Code | G |
| Pressure [Max] | 3600 psi |
| Actuator Type | Solenoid |
| Crossover | All Ports Blocked |
| Mechanical Options | None |
| Response Type | Standard Response |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Pressure Port Check Valve Pressure | N/A |
| Port T Pressure Rating | 1000 psi |
| Coil Type Code | U |
| Center Position | All Ports Blocked |
| Rated Flow [Max] | 25 gal/min |
| Reducer Module | N/A |
| Coil Type | DIN 43650 |
| Solenoid | Single |
| Valve Type | Standard-Duty |
| Weight | 10.0 LB |
