Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Voltage & Frequency | 12 VDC |
| Mechanical Options | None |
| Seal Material | Buna-N |
| Indicator Lights | No |
| Spool Code | 2 |
| Rated Flow [Max] | 25 gal/min |
| Response Type | Standard Response |
| Pressure Port Check Valve Pressure | N/A |
| Valve Type | Standard-Duty |
| Pressure [Max] | 3600 psi |
| Spool Spring Arrangement Code | A |
| Function | 2-Position Spring Offset |
| Center Position | All Ports Blocked |
| Pilot Valve Type | N/A |
| Design No. | 60 |
| Flow Direction Code | 4 |
| Electrical Connection | DIN 43650 |
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Operation | Solenoid Operated |
| Electrical Options | None |
| Mechanical Options Code | None |
| Coil Type | DIN 43650 |
| Cycle Rate [Max] | N/A |
| Coil Type Code | U |
| NFPA Size | D05 |
| AC/DC | DC |
| Overrides | No Overrides |
| Pilot/Drain | None |
| Crossover | All Ports Blocked |
| Solenoid | Single |
| Reducer Module | N/A |
| Electrical Options Code | None |
| Coil Rating Code | G |
| Weight | 10.0 LB |
