These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
H
Spool Spring Arrangement Code
BL
Overrides
No Overrides
Pilot/Drain
None
EN Code
None
NFPA Size
D03
Solenoid Code
H
Spool Indicator Switch Code
None
Electrical Options
None
Spool Code
0
Rated Flow [Max]
21 gal/min
Design No.
60
Solenoid
Single
Function
2-Position Spring Offset, End to Center
Indicator Lights
No
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Valve Type
High-Performance
Electrical Connection
DIN 43650
Voltage & Frequency
24 VDC
Port T Code
7
Coil Type Code
U
Mechanical Options
None
Manual Override Option Code
None
Pressure Port Check Valve Pressure
N/A
Housing Code
None
Pressure [Max]
5075 psi
Response Type
Standard Response
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
Function Code
0
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Center Position
All Ports Open
Seal Material
Buna-N
Pilot Valve Type
N/A
Crossover
All Ports Open
Solenoid Indicator Lights Code
None
Reducer Module
N/A
Coil Type
DIN 43650
Solenoid Energization Code
None
AC/DC
DC
Cycle Rate [Max]
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
