These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
EN Code
None
Function Code
0
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Spool Code
0
Voltage & Frequency
24 VDC
Valve Type
High-Performance
Manual Override Option Code
None
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Overrides
No Overrides
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Pilot/Drain
None
Design No.
60
NFPA Size
D03
Solenoid Code
H
Port T Code
7
Function
2-Position Spring Offset, End to Center
Coil Type Code
U
Housing Code
None
Port Restrictor Plug Code
None
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Open
Indicator Lights
No
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Solenoid
Single
Reducer Module
N/A
Coil Rating Code
H
AC/DC
DC
Mechanical Options
None
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
BL
Center Position
All Ports Open
Pilot Valve Type
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
