These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Design No.
60
Manual Override Option Code
None
Pilot Valve Type
N/A
Function Code
2
Valve Type
High-Performance
Overrides
No Overrides
Surge Suppressor/Damper Code
None
NFPA Size
D03
Rated Flow [Max]
21 gal/min
AC/DC
DC
Function
2-Position Spring Offset, End to End
Coil Type
DIN 43650
Seal Material
Buna-N
Solenoid Code
HL
Port Restrictor Plugs
None
Spool Code
2
Coil Type Code
U
Center Position
All Ports Blocked
Spool Indicator Switch Code
None
EN Code
None
Pressure Port Check Valve Pressure
N/A
Port T Code
7
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Mechanical Options
None
Solenoid
Single
Housing Code
None
Response Type
Standard Response
Pilot/Drain
None
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Solenoid Energization Code
None
Coil Rating Code
HL
Voltage & Frequency
24 VDC, Low Power Coil
Reducer Module
N/A
Operation
Solenoid Operated
Electrical Connection
DIN 43650
Cycle Rate [Max]
N/A
Electrical Options
None
Indicator Lights
No
Surge Suppressor/Damper
None
Crossover
All Ports Blocked
Spool Spring Arrangement Code
A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
