These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Coil Type
DIN 43650
Indicator Lights
No
Seal Material
Buna-N
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
NFPA Size
D03
Function
2-Position Spring Offset, End to End
Actuator Type
Solenoid
Solenoid Code
HL
Surge Suppressor/Damper Code
None
Coil Type Code
U
Solenoid
Single
Spool Shift Timing
N/A
Function Code
2
Housing Code
None
EN Code
None
Voltage & Frequency
24 VDC, Low Power Coil
Spool Spring Arrangement Code
A
Valve Type
High-Performance
Coil Rating Code
HL
Port T Code
7
Electrical Options
None
Reducer Module
N/A
AC/DC
DC
Pilot/Drain
None
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Center Position
All Ports Blocked
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Electrical Connection
DIN 43650
Manual Override Option Code
None
Solenoid Energization Code
None
Design No.
60
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
Overrides
No Overrides
Spool Code
2
Response Type
Standard Response
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
