These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Energization Code
None
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
AC/DC
AC
Function
2-Position Spring Offset, End to Center
EN Code
None
Valve Type
High-Performance
Design No.
60
Operation
Solenoid Operated
Spool Shift Timing
N/A
Manual Override Option Code
None
Electrical Connection
DIN 43650
Mechanical Options
None
Coil Type Code
U
Overrides
No Overrides
Pilot/Drain
None
Seal Material
Buna-N
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Rated Flow [Max]
21 gal/min
Crossover
All Ports Open
Pilot Valve Type
N/A
Actuator Type
Solenoid
Center Position
All Ports Open
NFPA Size
D03
Reducer Module
N/A
Coil Rating Code
B
Spool Spring Arrangement Code
BL
Indicator Lights
No
Pressure [Max]
5075 psi
Spool Code
0
Solenoid Indicator Lights Code
None
Port T Code
6
Function Code
0
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Housing Code
None
Coil Type
DIN 43650
Solenoid
Single
Solenoid Code
B
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
