These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Response Type
Standard Response
Spool Spring Arrangement Code
BL
Spool Code
0
Indicator Lights
No
Reducer Module
N/A
Solenoid Energization Code
None
Pilot/Drain
None
Mechanical Options
None
Electrical Options
None
Manual Override Option Code
None
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Design No.
60
Coil Type
DIN 43650
Valve Type
High-Performance
Operation
Solenoid Operated
Port T Code
6
Coil Rating Code
B
Actuator Type
Solenoid
Solenoid Code
B
Function Code
0
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Connection
DIN 43650
NFPA Size
D03
Spool Indicator Switch Code
None
Center Position
All Ports Open
Pressure [Max]
5075 psi
Pilot Valve Type
N/A
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Housing Code
None
Spool Shift Timing
N/A
Coil Type Code
U
Crossover
All Ports Open
Function
2-Position Spring Offset, End to Center
Solenoid Indicator Lights Code
None
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Seal Material
Buna-N
Cycle Rate [Max]
N/A
Solenoid
Single
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper Code
None
EN Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
