These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plugs
None
Manual Override Option Code
None
Pressure [Max]
5075 psi
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Reducer Module
N/A
AC/DC
DC
Electrical Connection
No Connector
Coil Type Code
F
Pilot/Drain
None
EN Code
None
Solenoid Energization Code
None
NFPA Size
D03
Response Type
Standard Response
Spool Shift Timing
N/A
Pilot Valve Type
N/A
Coil Rating Code
H
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Port T Pressure Rating
3000 psi
Solenoid
Double
Operation
Solenoid Operated
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
C
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Cycle Rate [Max]
N/A
Spool Code
0
Crossover
All Ports Open
Housing Code
J
Solenoid Indicator Lights Code
None
Function Code
0
Mechanical Options
None
Design No.
60
Solenoid Code
H
Function
3-Position Spring Centered
Overrides
No Overrides
Indicator Lights
No
Port T Code
7
Seal Material
Buna-N
Valve Type
High-Performance
Actuator Type
Solenoid
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC
Center Position
All Ports Open
Spool Indicator Switch Code
None
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
